Automobile Air Intake Grille Injection Mold

1.PC+ABS

2.Intensive and thin grille machining accuracy needs to be controlled, step is less than 0.05mm.

3.Sink mark, warpage etc defects can be controlled so as to have a good part appearance.

4.Can avoid appearance defects and warpage by conducting professional analysis before mold making.

Part Material:
PC+ABS
Part Characteristic:
Intensive grille design is difficult for machining and forming; Visible defects are not allowed after electroplating.
Machining Accuracy:
Intensive and thin grille machining accuracy needs to be controlled, step is less than 0.05mm.
Technical Outstanding Point:
Sink mark, warpage etc defects can be controlled so as to have a good part appearance
GDM Advantage:
Can avoid appearance defects and warpage by conducting professional analysis before mold making.