Motor Cover Stamping Mold

1.SGCD1

2.Bending has big spring back and hard to control the part dimension.

3.Part thickness:1.2mm, the height is required to be controlled within ±0.1mm after bending.

4.The assembly tolerance of 3 round holes at these 3 bendings should be within +/-0.3

5.Through the simulation analysis of AutoForm R10, the product spring back is calculated, and the pre-deformation design is adopted to eliminate the problem that may cause the NG dimensions at early stage before the die building.

Availability:



Inquire

Part Material:
SGCD1
Part Characteristic:
Bending has big spring back and hard to control the part dimension.
Machining Accuracy:
Part thickness:1.2mm, the height is required to be controlled within ±0.1mm after bending
Technical Outstanding Point:
The assembly tolerance of 3 round holes at these 3 bendings should be within +/-0.3
GDM Advantage:
Through the simulation analysis of AutoForm R10, the product spring back is calculated, and the pre-deformation design is adopted to eliminate the problem that may cause the NG dimensions at early stage before the die bu