Right Side Plate Stamping Mold

1.SGCD2

2.The product has no warping, scratches, wrinkles and other appearance defects.

3.Bending Angle +/-1.5 degrees

4.After forming, the ribbon at the handle can be drawn freely, and its unbroken connection, can ensure the strength of the product.The bending height is 185MM and the angle is maintained at 90 degrees +/-1.5 degrees.

5.Through the simulation analysis of AutoForm R10, combined with the experience of making similar parts for many times,the dimension measurement at both root and top side of the big bending are both ok in one die trial.

Availability:



Inquire

Part Material:
SGCD2
Part Characteristic:
The product has no warping, scratches, wrinkles and other appearance defects.
Machining Accuracy:
Bending Angle +/-1.5 degrees.
Technical Outstanding Point:
After forming, the ribbon at the handle can be drawn freely, and its unbroken connection, can ensure the strength of the product.The bending height is 185MM and the angle is maintained at 90 degrees +/-1.5 degrees.
GDM Advantage:
Through the simulation analysis of AutoForm R10, combined with the experience of making similar parts for many times,the dimension measurement at both root and top side of the big bending are both ok in one die trial.