Partition Plate Stamping Mold

1.SGCD1 T= 0.6

2.The products are free from warping, scratching, wrinkling and other appearance defects.

3.Bending Angle +/-1.5 degrees

4.The bending height is 150MM and the angle is maintained at 90 degrees +/-1.5 degrees, through CAE analysis and simulation, the forming springback compensation is ok by one die trial.

5.Through AutoForm R10 simulation analysis, combined with spring back data, pre-deformation design is also adopted, while product analysis and optimization are seamlessly integrated with product development, eliminating the possible defects such as appearance defects during the product design stage.

Availability:



Inquire

Part Material:
SGCD1 T= 0.6
Part Characteristic:
The products are free from warping, scratching, wrinkling and other appearance defects.
Machining Accuracy:
Bending Angle +/-1.5 degrees
Technical Outstanding Point:
The bending height is 150MM and the angle is maintained at 90 degrees +/-1.5 degrees, through CAE analysis and simulation, the forming springback compensation is ok by one die trial.
GDM Advantage:
Through AutoForm R10 simulation analysis, combined with spring back data, pre-deformation design is also adopted, while product analysis and optimization are seamlessly integrated with product development, eliminating the possible defects such as appearance defects during the product design stage.