Sensing Needle

1.Orichalcum C2680-H T=0.6

2.Need to control the deformation for the 0.1 diameter of silver wire.

3.The plane of the spring material belt should be kept flat and the arc should be less than 1MM.

4.No obvious burrs, die mark, bending, deformation, etc. on the flat surface of the product.

5.Analyzing from a professional point of view, avoiding problems that will affect the appearance and deformation before die building.

Part Material:
Orichalcum C2680-H T=0.6
Part Characteristic:
Need to control the deformation for the 0.1 diameter of silver wire.
Machining Accuracy:
The plane of the spring material belt should be kept flat and the arc should be less than 1MM.
Technical Outstanding Point:
No obvious burrs, die mark, bending, deformation, etc. on the flat surface of the product.
GDM Advantage:
Analyzing from a professional point of view, avoiding problems that will affect the appearance and deformation before die building.