 |
Part Name： clapboard
Part Material：Thermal response board Q235A T= 1.15
Part Characteristic：The product has no warping, scratches, wrinkles or other appearance defects.
Machining Accuracy：Bending angle +/-1.5 degrees
Technical Outstanding Point：The bending height is 180MM, and the angle is kept at 90 degrees plus or minus 1.5 degrees. Through CAE analysis and simulation, the molding springback compensation test mold is fine once.
GDM of Advantage:Through AutoForm R10 simulation analysis, combined with springback data, using pre-deformation design, product analysis and product optimization that are seamlessly connected with product development, we can eliminate other undesirable problems that may cause appearance defects during the product design stage
Part Name： clapboard
Part Material：Thermal response board Q235A T= 1.15
Part Characteristic：The product has no warping, scratches, wrinkles or other appearance defects.
Machining Accuracy：Bending angle +/-1.5 degrees
Technical Outstanding Point：The bending height is 180MM, and the angle is kept at 90 degrees plus or minus 1.5 degrees. Through CAE analysis and simulation, the molding springback compensation test mold is fine once.
GDM of Advantage:Through AutoForm R10 simulation analysis, combined with springback data, using pre-deformation design, product analysis and product optimization that are seamlessly connected with product development, we can eliminate other undesirable problems that may cause appearance defects during the product design stage
