Partition Board Stamping Mold

1.SGCD2

2.As the R is different, the part will twist after forming.

3.Bending Angle +/-1.5 degrees

4.Irregular bending Radius, bending height 170MM, angle maintained 90 degrees +/- 1.5 degrees.

5.Simulate and analyse the amount of the spring back of the product through AutoForm R10, and carry out
pre-deformation design to avoid the distortion and spring back of the product.

Availability:



Inquire

Part Material:
SGCD2
Part Characteristic:
As the R is different, the part will twist after forming.
Machining Accuracy:
Bending Angle +/-1.5 degrees
Technical Outstanding Point:
Irregular bending Radius, bending height 170MM, angle maintained 90 degrees +/- 1.5 degrees.
GDM Advantage:
Simulate and analyse the amount of the spring back of the product through AutoForm R10, and carry out pre-deformation design to avoid the distortion and spring back of the product.