You are here: Home » Stamping Mold » Home Appliances Stamping Mold » EL.COMP.BOX Stamping Mold

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

EL.COMP.BOX Stamping Mold

1.SGCD1
2.4 bendind corners need to fit well without gaps. There is no apperance defect such as scratch, wrinkle.
3.The fitting gap tolerance of the four bending corners is guaranteed within 0.5MM
4.No cracks, distortions, burrs, scratches and other defects.
5.According to the experience of making electrical box, can identify and optimise the product structure in advance,which can avoid product cracking ( emboss radius is too small), and avoid bending not straight and spring back (emboss on the bending line).
Availability:
  • SGCD1

  • 4 bending corners need to fit well without gaps. There is no apperance defect such as scratch, wrinkle.

  • The fitting gap tolerance of the four bending corners is guaranteed within 0.5MM

  • No cracks, distortions, burrs, scratches and other defects.

  • According to the experience of making electrical box, can identify and optimise the product structure in advance,which can avoid product cracking ( emboss radius is too small), and avoid bending not straight and spring back (emboss on the bending line).

Previous: 
Next: 

ZHUHAI GREE DAIKIN PRECISION MOLD CO., LTD.

Tel: +86-756-8593099
No. 688, Jinji Road, Xiangzhou District, Zhuhai, Guangdong, China.

QUICK LINKS

PRODUCTS

GET IN TOUCH
Copyright © 2022 ZHUHAI GREE DAIKIN PRECISION MOLD CO., LTD. Privacy Policy | Sitemap | Supported by leadong.com