You are here: Home » Stamping Mold » Home Appliances Stamping Mold » Fan Motor Stand Stamping Mold

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Fan Motor Stand Stamping Mold

1.SGCD1
2.The surface needs to be flat, so that the water will not stay on the product. There is no apperance defect such as scratch, wrinkle.
3.Bending tolerance can reach +/-0.3mm
4.Ensure the appearance quality of the product, control the material squeezing/deformation at the bending area, identify the defects of the product in advance to make optimization of the product (e.g. corner cracking at the burring hole, piercing deformation after forming because of material slipping).
5.Can achieve high efficient production by using robot hand with transfer dies and using progressive dies.
Availability:
  • SGCD1

  • The surface needs to be flat, so that the water will not stay on the product. There is no apperance defect such as scratch, wrinkle.

  • Bending tolerance can reach +/-0.3mm

  • Ensure the appearance quality of the product, control the material squeezing/deformation at the bending area, identify the defects of the product in advance to make optimization of the product (e.g. corner cracking at the burring hole, piercing deformation after forming because of material slipping).

  • Can achieve high efficient production by using robot hand with transfer dies and using progressive dies.

Previous: 
Next: 

ZHUHAI GREE DAIKIN PRECISION MOLD CO., LTD.

Tel: +86-756-8593099
No. 688, Jinji Road, Xiangzhou District, Zhuhai, Guangdong, China.

QUICK LINKS

PRODUCTS

GET IN TOUCH
Copyright © 2022 ZHUHAI GREE DAIKIN PRECISION MOLD CO., LTD. Privacy Policy | Sitemap | Supported by leadong.com